리소스 센터 > 사례 연구

17.1m AGV‑Ready Lift Platform｜4‑Cylinder 8‑Column｜Global Air Treatment Leader Case Study

Q: The lift travels 17.1 metres – won‘t it wobble? How do you ensure stability?

답변: This was our core design challenge. We used a 4‑cylinder, 8‑column tower‑grade structure – four hydraulic cylinders driving eight guide rails closely connected to the columns, forming a highly indeterminate spatial frame structure together with the platform. Under eccentric loads, forces are redistributed through multiple connection points, effectively suppressing tilting and sway. Reinforced rails and precision guidance ensure smooth, wobble‑free operation across the full 17.1m stroke. Actual performance: with a full 5‑ton load at maximum height, platform sway is controlled within ±3mm – fully meeting AGV docking accuracy requirements.

Q: How does the AGV “talk” to the lift? Does it need extra equipment?

답변: No. We pre‑integrated an AGV communication interface module directly into the control architecture using a Siemens PLC. Communication supports hardwired connections, RS485, or dry contact signals. Core signals include: AGV sends call requests, target floor, door open/close requests; the lift returns position‑reached signals, door status, and current floor. During system integration with the client‘s existing AGV dispatch system, the entire interface was commissioned in just 3 days – no additional gateways or protocol converters were needed.

Q: How do the rapid doors prevent air leakage and noise transmission?

답변: The client is an air treatment equipment manufacturer with strict workshop environment requirements. We installed hard rapid roll‑up doors with double‑layer aluminium panels and polyurethane foam insulation, fitted with sealing strips on all four edges. Fire‑resistant sealing material fills the gaps between the door frame and shaft structure. The doors open at 1.5 m/s and close at 0.6 m/s – each open/close cycle takes just 2.5 seconds . Excellent sealing and fast operation ensure temperature and noise isolation between floors without creating a material flow bottleneck.

Q: How are the 17‑metre guide rails transported and installed? Is on‑site installation difficult?

답변: We used segmented design and modular prefabrication . The guide rails are divided into three sections (approximately 6 metres each) based on floor height – easy for road transport. Rail joints use high‑precision locating pins + bolted connections , ensuring straightness error ≤0.5mm across the full length. All structural components were pre‑assembled and pre‑drilled in the factory, then lifted and assembled directly on‑site. With modular design and parallel construction, the entire installation and commissioning cycle took just 15 days from equipment arrival – saving nearly 50% of the time compared to conventional construction methods.

POSTED: 6/25/2026

개요

프로젝트 유형: Heavy‑duty guide rail lift platform (5‑ton, 17.1m ultra‑high travel)
의뢰인: A leading global manufacturer of industrial air purification and waste gas treatment systems
위치: Client’s manufacturing facility
산업: Industrial air treatment and emission control equipment manufacturing
핵심 기능: Fully automatic vertical transfer of large filtration units, ductwork sections, and system components across three production floors
주요 매개변수: 5‑ton capacity, 17.1m travel, platform 2600×3200mm, 4‑cylinder 8‑column structure, Siemens PLC with AGV interlock module

산업 현황

This client is a global leader in industrial air purification and waste gas treatment systems, producing large‑scale filtration units, scrubbers, VOCs treatment systems, and ductwork networks. These products are characterised by large dimensions, heavy loads, and modular construction – a single filtration unit can weigh several tons, with duct sections reaching several metres in length.

As the factory expanded and adopted lean manufacturing principles, a critical bottleneck emerged: how to move large system components efficiently and safely between three production floors?

Traditional solutions – forklifts combined with freight lifts – struggled with 17‑metre vertical travel. Forklifts couldn’t enter standard freight lifts directly, requiring multiple handling steps per transfer. This resulted in low material flow efficiency, frequent manual intervention, and increased safety risks. The client needed a system capable of lifting 5‑ton loads to 17 metres while integrating seamlessly with AGVs for fully automated material flow.

기본 매개변수

매개변수	사양
모델	Guide rail lift platform (SJD5.0‑17.1)
정격 부하	5000 kg
Lift travel	17,100 mm
플랫폼 크기(W×D)	2600 × 3200 mm
Stations	3 stops / 3 stations
바닥 문	Hard rapid roll‑up doors on each floor
Core structure	실린더 4개, 기둥 8개
제어 시스템	Siemens PLC with AGV interlock module
모터	지멘스
Electrical components	Schneider
Bearings	NSK
주요 특징	Pre‑leveling device, full‑height perforated panel enclosure
Project date	2026

도전

Structural rigidity at extreme height: 17.1m vertical travel places extreme demands on rail verticality, frame bending resistance, and chain tension stability. Conventional lifts are prone to deflection and wobble at such heights.
Seamless AGV integration: The system had to be “plug‑and‑play” compatible with AGVs, requiring control architecture designed from the outset with AGV communication interfaces and dispatch logic.
Three‑floor isolation and safety: The lift shaft connects three active production floors, requiring reliable isolation on each level – ensuring safety access control, temperature/noise management, and no bottleneck in material flow.
Fast‑track deployment: An aggressive project timeline demanded complete design‑to‑delivery within a compressed schedule.

솔루션

Tower‑Grade Structural Design – 4 Cylinders, 8 Columns + Reinforced Rails

Design approach: 17.1m travel with 5‑ton loads required a structural solution beyond standard specifications.

We adopted a 4‑cylinder drive + 8‑guide‑rail support heavy‑duty architecture. The eight rails, closely connected to the columns, together with the platform frame form a highly indeterminate spatial frame structure – redistributing forces through multiple connection points under eccentric loads to effectively suppress tilting and sway. Reinforced rails and precision guidance ensure smooth, wobble‑free operation across the full 17.1m stroke.

Advantage: Achieves stable 5‑ton lifting at 17m height – eliminating deflection and sway risks.

Smart Control with AGV‑Ready Interface – Industry 4.0 Ready

Design approach: AGV integration capability was built into the control architecture from day one – not retrofitted later.

We used a 지멘스 PLC with a pre‑integrated AGV communication interface module. Communication supports hardwired connections, RS485, or dry contact signals. Core signal exchange includes:

AGV sends: call request, target floor, door open/close requests, load in/out confirmation
Lift sends: current floor, position‑reached signal, door status

Advantage: Direct connection to AGV dispatch systems with no secondary modification – “plug‑and‑play” integration into existing or planned automated logistics networks.

Hard Rapid Door Isolation – Safety and Efficiency Combined

Design approach: Hard rapid roll‑up doors installed on each floor, electrically interlocked with the lift platform – door open → platform cannot move; platform moving → all doors remain closed; platform landed → corresponding door unlocks.

Advantage: Hard doors offer excellent impact resistance and sealing; fast open/close minimises waiting time and does not create a material flow bottleneck.

Modular Design & Fast‑Track Delivery

Design approach: Pre‑engineered modular methodology – design, fabrication, and assembly proceeded in parallel, with on‑site installation synchronised with factory prefabrication.

Advantage: Achieved full design‑to‑delivery within a compressed timeline without compromising quality or specifications.

워크플로우

Step 1: AGV calls the lift – AGV arrives at ground floor with palletised component and sends an automatic call request.

Step 2: Door opens and load enters – The rapid door opens, the platform levels, and the AGV deposits the load.

Step 3: Vertical transfer – The platform lifts the component at controlled speed to the target production floor.

Step 4: Load exits – The destination floor door opens, and another AGV or workstation retrieves the component for the next assembly step.

Step 5: Cycle repeats – The platform resets, ready for the next cycle – enabling continuous, scheduled material flow with minimal manual intervention.

제품 인증서

자주 묻는 질문

답변: This was our core design challenge. We used a 4‑cylinder, 8‑column tower‑grade structure – four hydraulic cylinders driving eight guide rails closely connected to the columns, forming a highly indeterminate spatial frame structure together with the platform.

Under eccentric loads, forces are redistributed through multiple connection points, effectively suppressing tilting and sway.

Reinforced rails and precision guidance ensure smooth, wobble‑free operation across the full 17.1m stroke.

Actual performance: with a full 5‑ton load at maximum height, platform sway is controlled within ±3mm – fully meeting AGV docking accuracy requirements.

답변: No. We pre‑integrated an AGV communication interface module directly into the control architecture using a Siemens PLC.

Communication supports hardwired connections, RS485, or dry contact signals. Core signals include: AGV sends call requests, target floor, door open/close requests;

the lift returns position‑reached signals, door status, and current floor.

During system integration with the client‘s existing AGV dispatch system, the entire interface was commissioned in just 3 days – no additional gateways or protocol converters were needed.

답변: The client is an air treatment equipment manufacturer with strict workshop environment requirements.

We installed hard rapid roll‑up doors with double‑layer aluminium panels and polyurethane foam insulation, fitted with sealing strips on all four edges. Fire‑resistant sealing material fills the gaps between the door frame and shaft structure.

The doors open at 1.5 m/s and close at 0.6 m/s – each open/close cycle takes just 2.5 seconds. Excellent sealing and fast operation ensure temperature and noise isolation between floors without creating a material flow bottleneck.

답변: We used segmented design and modular prefabrication.

The guide rails are divided into three sections (approximately 6 metres each) based on floor height – easy for road transport. Rail joints use high‑precision locating pins + bolted connections, ensuring straightness error ≤0.5mm across the full length.

All structural components were pre‑assembled and pre‑drilled in the factory, then lifted and assembled directly on‑site.

With modular design and parallel construction, the entire installation and commissioning cycle took just 15 days from equipment arrival – saving nearly 50% of the time compared to conventional construction methods.

자재 취급 장비를 사용자 지정하려면 다음과 같이 하세요. 문의하기 →.