РЕСУРСНЫЙ ЦЕНТР > Кейс-стади

10‑Ton Mechanical Tipping Platform｜Shandong University Rock Crushing Experiment

Q: <strong>Will the rock tip or wobble during flipping due to irregular shape and off‑centre gravity?</strong><div><span style="font-weight: 600;">

Ответ: No. The dual platforms are rigidly connected via a common shaft and 20A‑2 double chains – both sides move in perfect sync. The J200×100×8 heavy‑duty frame resists bending even with extreme eccentric loads. The motor brake locks at any angle – no hydraulic creep.

Q: <strong>Why use a mechanical chain drive instead of hydraulic cylinders?</strong><div><span style="font-weight: 600;">

Ответ: Rocks are rough and create impact shocks – hydraulics leak and wear quickly under such loads. Dual‑cylinder synchronisation is also difficult with eccentric loads. Chains are rigid, impact‑resistant, and maintenance‑free (just regular lubrication). They guarantee perfect synchronisation without the complexity of hydraulics.

Q: <strong>The platform is 1500×1500mm – how do you fit rocks larger than that?</strong><p data-start="9499" data-end="9620"></p>

Ответ: Removable 200mm wing plates are bolted to each side – expanding the deck to 1700×1700mm. The plates are FEA‑verified for 10‑ton loads. They can be unbolted easily when not needed, restoring the standard size for forklift access.

Q: <strong>4. How do you get a 10‑ton rock onto the platform with a forklift?</strong><div><span style="font-weight: 600;">

Ответ: Two removable rectangular tubes are fixed under the platform as guide slots. The forklift forks slide along the tubes to place the rock securely, then back out. The tubes are bolted to the frame and can be removed after loading, leaving a flat deck. One forklift, one operator – no crane needed.

POSTED: 6/24/2026

Обзор

Тип проекта: Heavy‑duty mechanical tipping platform (dual platforms, 90° tilt)
Заказчик: Shandong University (Geotechnical & Structural Engineering Research Centre)
Отрасль: Higher education research (rock mechanics, deep rock engineering)
Основная функция: 90° tipping of 10‑ton natural rock blocks for multi‑angle breaking, sampling, CT scanning, and compressive strength testing
Основные параметры: 10‑ton capacity, dual independent platforms (1500×1500mm each), removable wing plates (expand to 1700×1700mm), mechanical chain drive (20A‑2), 4kW motor, wireless remote control

История клиента и требования к исследованию

Shandong University’s Geotechnical & Structural Engineering Research Centre conducts rock mechanics studies on deep tunnels and underground caverns. For эксперименты по дроблению горных пород, researchers need to flip 10‑ton irregular natural rock blocks 90° to access multiple faces for breaking, sampling, CT scanning, and strength testing.

Traditional methods (cranes or manual levers) are unsafe, imprecise, и damage samples – risking injury, compromising test repeatability, and destroying rock structure.

Заказчик потребовал smooth, precise, and repeatable flipping device, with forklift loading/unloading and a platform adaptable to varying rock sizes (up to 1700mm after expansion).

Основные параметры

Параметр	Значение
Номинальная нагрузка	10 000 кг
Угол наклона	90°
Number of platforms	2 independent platforms
Basic platform size (each)	1,500 × 1,500 mm
Platform size with wing plates	1,700 × 1,700 mm
Рама платформы	J200×100×8 rectangular tube
Platform deck thickness	8 mm
Drive motor power	4 kW
Drive chain	20A‑2 double strand
Tilt mechanism	Mechanical chain drive
Управление	Wireless remote
Auxiliary features	Removable fork guide tubes, removable wing plates
Цвет	Желтый
Дата заказа	December 22, 2025
Дата отгрузки	January 10, 2026 (20 days)

Вызов

Extreme eccentric load and impact: Irregular natural rock blocks have large centre‑of‑gravity offsets. The impact forces generated during tilting under 10‑ton eccentric loading far exceed regular uniform loads – demanding exceptional structural rigidity.
Forklift loading/unloading: The forklift forks must slide under the platform to place the rock. A solid platform base would block access.
Size adaptability: Rocks may exceed 1500mm – the platform must be expandable without replacing the equipment.
Operational safety: Operators must stay at a safe distance during flipping to avoid injury from sudden cracking or overturning.
Urgent delivery: Ordered on December 22, required shipment by January 10 – just 20 days.

Решения

Dual‑platform mechanical flip structure – handling eccentric load and impact

Design approach: Conventional hydraulic tippers work well for regular workpieces, but rock blocks have large centre‑of‑gravity offsets and rough surfaces. Hydraulic systems are prone to leakage and pressure loss under eccentric impact. This equipment uses две независимые платформы + механический цепной привод:

Two 1500×1500mm platforms support the rock at both ends. A 4kW motor drives 20A‑2 double‑strand chains to rotate both platforms synchronously 90° around a central shaft – flipping the entire rock smoothly.

Drive: 4kW motor + 20A‑2 double‑strand chain (high safety factor, impact‑resistant)
Frame: J200×100×8 rectangular tube – rigid enough for 10‑ton eccentric loads
Platform deck: 8mm thick steel plate – wear‑resistant

Removable wing plates – flexible size expansion

Requirement: Rock dimensions may exceed 1500mm, requiring temporary platform enlargement.

Solution: Two Съемные пластины крыльев шириной 200 мм (screw‑fixed) are added on the long and short sides of each platform. With wing plates installed, the platform size becomes 1700×1700mm. The wing plates are removed when not needed – no interference with forklift access.

Forklift guide tubes – solving the loading/unloading problem

Challenge: Forklift forks must slide under the platform to place the rock. A solid platform base blocks access.

Solution: Two Съемные прямоугольные трубки на каждой платформе, закрепленные под палубой и образующие направляющие пазы для зубьев вил. Погрузчик перемещает вилы по трубкам, помещает камень и отъезжает назад. Трубки крепятся винтами и могут быть удалены после проведения экспериментов, оставляя ровную поверхность платформы.

Wireless remote control – ensuring operator safety

Safety requirement: Operators must stay at a safe distance during 10‑ton rock flipping.

Solution: A беспроводной пульт дистанционного управления allows the operator to start, stop, and reset the tilt from a distance. The motor has a self‑locking brake to hold the angle when power is off.

Срочная доставка

Challenge: Ordered December 22, required shipment by January 10 – only 20 days.

Solution: Priority production scheduling; key components (motor, chains, bearings) pre‑stocked. Shipment made on January 10 as required.

Сертификаты на продукцию

FAQ

Ответ: No. The dual platforms are rigidly connected via a common shaft and 20A‑2 double chains – both sides move in perfect sync.

The J200×100×8 heavy‑duty frame resists bending even with extreme eccentric loads. The motor brake locks at any angle – no hydraulic creep.

Ответ: Rocks are rough and create impact shocks – hydraulics leak and wear quickly under such loads.

Dual‑cylinder synchronisation is also difficult with eccentric loads. Chains are rigid, impact‑resistant, and maintenance‑free (just regular lubrication).

They guarantee perfect synchronisation without the complexity of hydraulics.

Ответ: Removable 200mm wing plates are bolted to each side – expanding the deck to 1700×1700mm.

The plates are FEA‑verified for 10‑ton loads. They can be unbolted easily when not needed, restoring the standard size for forklift access.

Ответ: Two removable rectangular tubes are fixed under the platform as guide slots.

The forklift forks slide along the tubes to place the rock securely, then back out.

The tubes are bolted to the frame and can be removed after loading, leaving a flat deck.

One forklift, one operator – no crane needed.

Если вы хотите изготовить оборудование для обработки материалов по индивидуальному заказу, пожалуйста свяжитесь с нами →.