Nákladní výtah z nerezové oceli 304 pro manipulaci s farmaceutickými surovinami

POSTED: 12/4/2024

Usage

Celý stroj, který se primárně používá ke zvedání surovin v čistých dílnách farmaceutických společností, byl ošetřen z hlediska čistoty a splňuje požadavky příslušných oddělení pro použití v dílnách třídy 300 000 čistých prostor GMP.

Naše řešení

Platform and space dimensions:
- Platform size: 1000mm x 1000mm
- Space size: 1800mm x 1300mm
Travel and direction:
- In-out direction: 1000mm through access
- Travel height: 2200mm
Load capacity and stops:
- Rated load: 500kg
- Stops: 2 stops at 2 stations
Structure and materials:
- Equipment grade: Standard
- Structural form: 2 cylinders, 4 tracks
- Material standards:
  - Guide rail: H100
  - Cylinder specifications: Φ50-35
  - Lifting frame: 160mm x 60mm x 4mm
  - Raising frame: 120mm x 60mm x 4mm
Platform and panel materials:
- Platform frame: 80mm x 80mm square pipe or workshop stainless steel scrap
- Platform panel: 2.5mm thick 304 stainless steel sheet
Other components:
- Pump station: 3 kW
- Chain: Stainless steel
- Steel wire rope: 12#
- Landing doors: 2 sets
- Pit: No pit
- Entry ramp: Not specified in detail

Additional Equipment Requirements

Overall Machine Requirements:
- The entire machine should be enclosed with 2mm thick 304 stainless steel.
- The total height of the machine must not exceed 4100mm, considering the site floor-to-ceiling height of 4100mm.
Platform Frame and Railings:
- The platform frame should be made of 304 stainless steel rectangular tubing.
- Safety railings on both sides of the platform should be 0.8 meters high and made of 304 stainless steel.
Chain:
- Made of stainless steel.
Landing Doors:
- 2 sets of center-opening doors, with a total height of 1.5 meters and a total width of 1.6 meters.
- Doors should feature an interlock that cuts power when opened.
- Made from 304 stainless steel square tube and 304 stainless steel sheet, as referenced in the design drawings.
Packaging:
- Due to the long transportation distance, it’s crucial to pack stainless steel sheets and other fragile components securely to avoid damage and the potential costs of replacements.
Production Considerations:
- The installation will occur on a steel platform inside the workshop, which offers an open space environment.
- Only transportation dimensions need to be considered during design and fabrication.